Williams Sound Digi-Loop DL107 NET Скачать руководство пользователя страница 9

Страница: 9 / 40

DL107, DL207 and DL210 2.0 Digi-Loop™ DSP Induction Loop Amplifiers

Using the Dante audio input

The DL107/207/210 NET

“D”

models provide a Dante RJ-45 network jack. The addition of the Dante jack enables a virtually unlimited number of

digital audio sources to be routed and streamed to the amplifier.
To change the parameters of Dante (i.e. IP address, Dante Device Name) you must use the Dante Controller software on a PC. The Dante

parameters can be viewed, but cannot be set, on the front LCD Display on the loop amplifier (or PC/iPad App). For more information on

configuration and usage of

Dante Controller

, please visit Audinate’s website at: https://www.audinate.com/products/software/dante-controller.

Note: Dig In L and Dig In R are separate channels of audio. They can be used, for example, if two different audio programs are desired, Dig In L

could be routed to one loop and Dig In R routed to the other loop. The mixer functions are used to route each channel to the desired loop. See the

section “Input Configuration” for more information about configuring these inputs.

Format

Sample Rate:

44.1 & 48 kHz

Bit Depth:

24 bits

Dante network

Connect via Ethernet
Set the Dante ethernet settings in the server to
•

Obtain an IP address automatically

•

Obtain DNS server address automatically

Dante Controller

All Dante device setup and source routing is performed through Dante Controller. This includes the IP Address and Dante Device Name that

appear in the loop amplifier “Net Info” screen. If a name change is desired, or the Dante IP Address needs to be set, refer to Dante Controller

documentation. To view the amplifier settings configured by Dante Controller, go to “System Configuration - Tech Tools - Net Info” and scroll down

to the Dante section.

The Dante jack LED indicators operate differently than standard ethernet jack LEDs. See illustration below.

Dante jack LED indication (this differs from standard ethernet).

OFF

No Network Link

OFF

Green

Amber

10 MBps link detected

(not supported)

OFF

Green

Amber

100 MBps link detected

(supported)

Green

Amber

BLINKING

Network Activity

Green

Amber

Dante Jack Network LED indicators

A591

OFF

No Network Link

OFF

Green

Amber

10 MBps link detected

(not supported)

OFF

Green

Amber

100 MBps link detected

(supported)

Green

Amber

BLINKING

Network Activity

Green

Amber

Dante Jack Network LED indicators

A591

Содержание Digi-Loop DL107 NET









































Результаты поиска

Содержание Digi-Loop DL107 NET

Отзывы:

Бренды по названию

Популярные бренды

Williams Sound Digi-Loop DL107 NET, Руководство по установке

Результаты поиска

Содержание Digi-Loop DL107 NET

Отзывы:

Бренды по названию

Популярные бренды