manualshive.com logo in svg

Williams Sound Digi-Loop DL107 NET, Руководство по установке

Поделиться
Скачать
Williams Sound Digi-Loop DL107 NET Скачать руководство пользователя страница 4

DL107, DL207 and DL210 2.0   Digi-Loop™ DSP Induction Loop Amplifiers

4

Firmware Disclaimer

This product includes the lwIP TCP/IP stack and the Deltatee tftp_server module. To comply with the terms of the licenses for these items, we must 
provide you with the following information.
lwIP TCP/IP stack: Copyright (c) 2001-2004 Swedish Institute of Computer Science. All rights reserved.
Deltatee tftp_server module: Copyright (c) Deltatee Enterprises Ltd. 2013. All rights reserved.
Both items are licensed under the following terms.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation 
and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

How to Read this Manual

The purpose of this manual is to give you supporting documentation for the commissioning of a loop system. You must first (1) connect the amplifier, 
(2) calibrate the amplifier to the loop wire(s) and then (3) adjust the output frequency response and automatic gain to be as flat and consistent as 
possible.  The goal is to meet the IEC Specification for loop systems.  It is highly recommended to take an advanced loop class prior to installation 
as commissioning is an involved process.
The manual is organized as follows:

1

Amplifier overview

Describes the purpose of this manual, amp models & features, and basic 

commissioning steps

2

Getting started: Connecting the 

Amplifier

Rear panel jacks, typical connections, do’s and don’ts

3

Checking and updating Firmware

Checking version, downloading and upgrading firmware

4

Installing the PC App

Downloading and installing the PC App

5

Calibrating and Commissioning

Configuring the amplifier to work with the loop wires

6

Appendicies

Maintenance and cleaning.

Resources.

Front Panel Controls Reference

PC App Reference

Specifications

Warranty

Содержание Digi-Loop DL107 NET









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды