manualshive.com logo in svg

Williams Sound Digi-Loop DL107 NET, Руководство по установке

Поделиться
Скачать
Williams Sound Digi-Loop DL107 NET Скачать руководство пользователя страница 14

DL107, DL207 and DL210 2.0   Digi-Loop™ DSP Induction Loop Amplifiers

14

4. Installing and configuring the PC App

The PC App is used to configure and commission the amplifier.  

When configuring the amplifier, the ethernet connection is recommended for best performance (

crossover cable required

). 

The ethernet connection cannot be used for firmware updates.

The USB port can be used with the PC App, but performance may be limited.

The USB port must be used for firmware updates.

  

Hardware Requirements:

Desktop/Laptop Computer

Windows PC. Mac PC not supported.

Mobile Device

Windows Surface Tablet.  
iPad, iPad Mini and Android not supported.

Operating System Compatibility

Windows XP
Windows Vista
Windows 7
Windows 8  
Windows 10
Microsoft .NET 4.0.30319 minimum.

Ethernet

10/100 GB
Standard RJ-45 jack.

USB

1.1
2.0 (12 MBs high speed)
3.0 (5 GBs super speed); standard “B” jack.

To install the PC App

1. 

Download the PC App

 by visiting our website www.williamssound.com and browse to Support - Software

2. 

Follow the instructions on the software download page

 to install the PC App.

-When the installation completes it will create this icon in the programs/apps directory: 

       

 

Содержание Digi-Loop DL107 NET









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды