Will Burt 5061001, Руководство оператора

Страница: 53 / 68

P
OSITION
I
T
PI-150
AND
PI-75
TP-5129001-J 6-3
January 2022
6.1.3 Set Stow and Unstow
This section describes how to set the stow and unstow presets.
6.1.3.1 With a Push Button Controller
With a push button controller:
1. Pan and tilt the positioner until it reaches the desired position.
2. Press and hold the left and right pan buttons simultaneously.
3.
With the left and right pan buttons pressed, select “Stow” to set the stow preset position,
or “Unstow” to set the unstow preset position.
6.1.3.2 With a Toggle Switch Controller
If using a controller with toggle switches, a jumper will need to be used to connect the clockwise
and counterclockwise contact closure wires to the contact closure power wire.
With a toggle switch controller:
1. Pan and tilt the positioner until it reaches the desired position.
2. Attach a jumper from both the white (counter clockwise) contact closure wire and green
(clockwise) contact closure wire to the red (power) contact closure wire.
3.
Select “Stow” to set the stow preset position, or “Unstow” to set the unstow preset
position.