15
Installing Gas Cylinder
To operate you will need (1) precision-filled gas cylinder between 11kg and 15kg.
Your barbecue will perform better if propane gas cylinder is used.
CAUTION:
Gas cylinder must be properly disconnected and removed prior to moving this grill.
Specification of Gas Cylinder*
（
*Gas cylinder not included
）
.
• Gas Type: I3+(28-30/37) (Propane at 37mbar)
• Connection: 27mm (compatible with Press on type regulator)
• Weight: 11 - 15 kg
Place Gas Cylinder
Gas Regulator
The type of the regulator to be used shall comply with the standard EN 16129: 2013.
Read thoroughly before use
Gas Regulator Parts
①
Regulator Identification Label
②
Regulator Assembly
③
Regulator Rubber Hose
④
Hose Clamp
⑤
Regulator Valve
Connecting and Operating Conditions
The “Snap on compact’’ is a regulator designed to supply gas to consuming appliance at a pressure and capacity as
indicated on the regulator identification label.
The “Snap on compact’’ can be fitted to any cylinders equipped with automatic valves having a diameter as indicated
on the regulator.
CAUTION:
The gas cylinder must always be used on the upright position.
CAUTION:
Whenever used outdoors, the ‘’snap on compact’’ should be suitable protected against rain.
CAUTION:
Never use a flame to look for leaks, do it using a soap solution.
CAUTION:
In case of any difficulties or problems, close the gas supply immediately and contact your dealer.
CAUTION:
Never move or displace the gas cylinder when it is on.
CAUTION:
Gas cylinder must be properly disconnected and removed prior to moving this grill.
Fitting the Hose
Before connecting the “Snap on compact’’ to a cylinder valve:
1. Connect regulation rubber hose to the barbed stem on the regulator.
Tip: Lubricate the barbed stem with water to help connect the regulator hose to the regulator.
2. Use a hose clamp to secure the regulation rubber hose to the regulator.
WARNING!
When in use place the gas
bottle on the floor away from
the base of the BBQ.
Gas
