12
English
English
NOTE: The current program cycle will be indicated by an arrow next to appropriate icons on
the left side of the LCD display.
NOTE: You can stop baking at any time. To do so, press and hold the
button until you
hear a beep. The selected baking program will be cancelled. If you want to use a different
program, select it using the MENU button
.
When baking is finished the unit will beep. The bread is now ready and you
can remove it from the unit.
Unplug the unit from the mains socket.
Open the lid.
Remove the bread pan using an oven glove.
Turn the pan upside down to remove the bread from the pan.
NOTE: If the bread is difficult to remove, shake the pan gently several times to release
the bread.
WARNING: If the kneading paddle remains in the loaf, you can cut the loaf slightly and remove
the paddle or use the provided hook to remove it.
WARNING: The bread pans are covered with a non-stick layer. Never use any metal utensils as
they will scratch the non-stick layer.
Description of functions
MEMORY/POWER FAILURE BACKUP SYSTEM
If the power supply is interrupted for not more than 7 minutes, the selected program
will be remembered and continued automatically until power is back. If the interruption
time exceeds 7 minutes, you must start the whole process from the beginning.
SAFETY/WARNING MESSAGES
The unit has several protections against malfunction. If faults occur, the unit will
beep and the display will show appropriate information messages. The messages
are described below.
1.
“E00”
indicates that temperature in the baking chamber is too low (below
-10°C). If this occurs, unplug the unit from the mains socket and allow it to reach
room temperature. The unit cannot operate at a temperature below -10°C.
2.
“E01”
indicates that the baking chamber is too hot (above 50°C). If this
occurs, unplug the unit from the mains socket and allow it to cool down for
approximately 30 minutes.
3.
“EEE”
indicates that the sensor is open circuit. If this occurs, contact your local
service centre.
4.
“HHH”
indicates that the sensor is short circuit. If this occurs, contact your local
service centre.
Содержание BM-2S
