19
INSTALL THE CERAMICS AND REFIT THE GLASS DOOR ASSEMBLY
Refer to page 31
for full instruc:ons on the arrangement of the volcanic rock, ceramic logs and ceramic bark.
Great care should be taken with the layout or incorrect flame pa8erns may result. Incorrect fuel bed layout
which results in a warranty call request will not be validated.
HEALTH AND SAFETY NOTICE
This appliance uses fuel effect pieces manufactured from Refractory Ceramic Fibres (RCF). Care must be taken to
avoid excessive exposure to these materials as they may cause irritaon to the eyes, skin, nose and throat. When
Handling avoid inhaling and contact with skin and eyes. It is recommended that disposable gloves are worn in
addion to a facemask and eye protecon. Aer handling wash hands thoroughly and any other exposed parts
which may have come in to contact with the material.
If a vacuum cleaner is used to clean the fuel bed or areas around the appliance there fragments of the material
may have fallen it is recommended that it be of the type fiMed with a HEPA filter.
Care should be taken when disposing of RCF materials. It is important to keep any dust to a minimum so it is
recommended that the fuel effect components are placed into a heavy duty plasc bag. The bag should be clearly
labelled
RCF WASTE
. These materials are not classified as hazardous waste and should be disposed of at a site
approved for the disposal of industrial waste.
Now fit the door using the reverse procedure employed for its removal. Simply slide the right hand side of the
door assembly onto the right hinge, then li the le hinge into posion and slide the assembly to the right.
