Wilbar Optimum Pool Round 95-0770, Общее руководство по инструкции

Страница: 38 / 51

Section 3
Section 2
36
Step 10 - Installing Top Coping
Above Ground Coping
10.1
10.2
Place 2" PVC Top Coping onto each pool panel leaving a 1/2”
gap between each length at the wall joints.
•
Above ground Coping MUST NOT overlap wall joints.
Each length of Top Coping will be attached with screws from
the exterior side of the pool only. Using a pencil, create a point
where each screw will be placed following the guidelines listed
below.
• Screws MUST be placed 2” from each end of coping.
• Screws MUST be placed at least every 15”.
Ensuring the Top Coping is fully seated on each panel, attach
the Top Coping to the panels with colored Head Cap Screws
#8 x 1/2” (#99-0138). DO NOT OVERTIGHTEN.
10.1
10.2
15”
2”
FINISHING THE POOL
OPTIMUM ROUND POOL