Wilbar Optimum Pool Round 95-0770, Общее руководство по инструкции

Страница: 14 / 51

OPTIMUM ROUND ABOVE / IN-GROUND POOL
Section 1
Section 2
Step 2
– Install Patio Blocks
12
2.1 Mark exact pool radius using the center stake.
Using the chart below, mark the locations of each patio
block. Sink the patio blocks flush with the ground at each
marked location . All patio blocks must be flush and level
with each other in all directions. Confirm with a straight
2x4 and level placed between blocks or by using a transit.
IN-GROUND INSTALLATIONS: Split the patio block
into two halves to allow rebar to be installed later as
seen in figure 2.3.
Panel joints will be located over each patio block. Place
an Anchor Plate (#77004) on top of each patio block.
Pool Size 12' 14’ 16’ 18' 21' 24' 27' 30'
Patio Block
Spacing
72-1/16" 84” 73- 1/2” 82-5/8" 77-7/8" 89" 100-1/8" 93-3/16"
Reference Angle
Between
Markings
60 Deg 60 Deg 45 Deg 45 Deg 36 Deg 36 Deg 36 Deg 30 Deg
2.1
2.2
Above-ground
2.3
In-ground
ABOVE GROUND / IN-GROUND