Wilbar Optimum Pool Round 95-0770, Общее руководство по инструкции

Страница: 28 / 51

Section 1
Section 2
Step 4
– Anchor Plate Installation
26
4.1 Ensure panels are centered and fully inserted into the
Anchor Plates.
Drill two 7/16" holes through the pool panels at each Anchor Plate
locations using the Anchor Plate holes as a drill guide. Secure
panels with 3/8” x 2-1/2” bolts (#99-0137) and nuts (#99-0134).
4.2 IMPORTANT!
Confirm roundness of the pool by measuring the diameter
across the pool at each panel joint. All diameters should be
identical. Adjust, as necessary. If this step is not completed,
the pool may not be perfectly round, which could lead to
problems later, and may void your warranty.
4.3 The included rebar must be used with an 8” high x 12” wide
concrete collar around the perimeter of the pool. Insert the rebar
halfway into the ground through the Anchor Plate holes before
pouring the concrete collar.
4.3
4.1
Section 2
FULLY IN-GROUND WITH POLYMER STEP
FULLY IN-GROUND STEP