Wilbar Optimum Pool Round 95-0770, Общее руководство по инструкции

Страница: 15 / 51

OPTIMUM ROUND ABOVE / IN-GROUND POOL
Section 1
Section 2
Step 3
– Wall Installation
13
3.1 Decide where the Skimmer Panel and plumbing will be
located and place the Skimmer Panel accordingly. The
Anchor Plates must be centered on each end of the panel.
Place the next panel, leaving a 1/8” gap between both
panels, ensuring the Anchor Plates are centered at each
panel joint.
3.2 Slide two 52” Splines (#77002) into compression seams to
lock both panels together.
If inserting the Splines is difficult:
• Apply cooking oil to lubricate and ease installation.
• Ensure a 1/8” gap between both panels is uniform top to
bottom.
• Check Splines and seams are free of any sand or debris.
Repeat this step with all remaining panels.
Note
– Before final panel is attached, bring sand for the
floor base and cove into the interior of the pool.
(See Page 9 for proper quantities)
3.2
3.1
ABOVE GROUND / IN-GROUND