Wilbar 95-0770 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 55

Wilbar 95-0770 Скачать руководство пользователя страница 26

OPTIMUM ROUND ABOVE / IN-GROUND POOL

Section 1

Step 13 - Backfill

13.1

Ensure all electrical bonding required in your area is

completed before backfilling the pool. This is a good time

to add any concrete foundation forms or perforated drain

pipes, if they will be used.

IMPORTANT:

Before any backfilling is started, the pool

water level must exceed the height of the surrounding

backfill required, as in examples 13.1 and 13.2. Failure to

do so will put excessive inward pressure on the pool

panels which may cause irreversible damage, and may

void your warranty.

Crushed stone or gravel aggregate,

3/8”

to 3/4

”

in

diameter

is the recommended backfill material. Backfill may be

placed directly against the pool wall. Do not use expansive

soils such as clay since this type of soil will place additional

stress on the pool and not allow for proper drainage away

from the surrounding area.

Only compact the backfill material manually by hand. Do

not use heavy machinery, especially around the skimmer

and plumbing fittings.

13.1

SAFE

TO BACKFILL

WATER LEVEL HIGHER THAN GROUND LEVEL

13.2

SAFE

TO BACKFILL

WATER LEVEL HIGHER THAN GROUND LEVEL

13.3

NOT RECOMMENDED

TO BACKFILL

WATER LEVEL LOWER THAN GROUND LEVEL

24

«
...
24
25
26
27
28
...
»

Содержание 95-0770
























































Отзывы:

Нет отзывов