
OPTIMUM ROUND ABOVE / IN-GROUND POOL
Section 1
Step 8 - Installing Top Coping (continued)
8.5
For pools that are installed into a hill and will utilize both
2” PVC Top
Coping
and
CP2 coping
as illustrated
below,
there is a transition kit available (#77268). This kit includes
two stainless steel plates to cap off the ends of the CP2
coping and give a finished edge.
Bend the lower tab on the end plate as seen in Figure 8.5.
Attach
the
End
Plate
with #10
x
¾”
Tek Screw
(#99-0090)
through the CP2 coping and into the Coping Adaptor Clip
(#77176). Repeat on the opposite end.
8.5
8.6
CP2 END CAPS
#77268
20
Содержание 95-0770
Страница 1: ......