WIKA operating instructions, model CTH7000
EN
29
08/2020 EN/BG
4. Design and function
4.3.3.3 Data logging menu
The CTH7000 can log data. Logging status is always shown at the bottom right-hand of
the measurement screen.
Data can be logged at regular intervals (the interval is set when
Setup
selected),
reviewed and logging can be turned on and off.
Press the
[Enter]
key to select the sub-menu used to set the various logging options.
Note that there are a finite number of data points that can be stored, so eventually, any
old results will be overwritten as the selected log will eventually wrap-round – i.e. the
oldest reading will be overwritten first.
⇒
After approximately 8000 points when continuously logging; starting and stopping the
log will decrease this number points available.
Use the start menu item to begin logging.
Select clear to clear the log and return to the main menu.
Selecting stop (see below) will halt logging. Logging can be restarted using the start
menu item (logging will then continue after the last point previously logged).
Only two menu options will be available when the instrument is logging.
