15
WIKA operating instructions model A2G-200
20210728.01 10/2021 EN/DE
EN
5.3 Configuration
The configuration of the control panel includes the setting of the output signals for
relative humidity (r. h.), temperature (T) and carbon dioxide (CO
2
).
The selection of the output signal is made via the installation of jumpers. Each output
signal must be set separately for each measurand.
Configuration elements
Terminal strip
Relay switching output (option)
Pins for the LC display lock
Pins for the selection of the output signal
Pins for the relay switch connection (option)
Pins for the terminal strip
Rear of hinged component
Mounting component
Installation of the jumpers
Jumper not
installed
Jumper
installed
Jumper
stored
Placing the jumper
5. Commissioning, operation
