Installation, operating and maintenance manual
UNIGAS 300
DDG6004MHGB/08-2017/Rev.A2 Software version from M 1.3.40 and D 2.3.37
42
Other settings for functions of UNIGAS 300
Protection level 1: password 2b
Name
Unit
Menu item
OBIS code
Description
ns
s
C.91.1
Maximum deviation of the clock in UNIGAS
300 that may be corrected, if the correction
value is greater than ns, status bit clock_set is
written; ns is set as standard at 10 s
Gas day
h
C.91.2
Moment at which UNIGAS 300 closes and
logs the day, as in day logger (end of gas day)
Time
hhmmss
9-2
0.9.1
Current time
Date
ddmmyy
9-2
0.9.2
Current date
EAN code
9-3
C.96.0
Meter location code (client-specific)
Dev addr
9-3
C.90.1
Device
address
for
IEC
62056-21
communication protocol, if no device address
is set, the device address equals 00000000
(the device will respond to any device address
or to no device address)
Device_adress_61E
C.90.26
Device address on which UNIGAS 300 will
respond as a UNIGAS 61 E.
Presentation
display clock
C.93.6
Selector switch for use of clock on display in
summer or winter time
Presentation
protocol clock DST
C.93.7
Selector
switch
for
use
of
clock
communication protocol in summer or winter
time
Use scheduler clock
DST
C.93.8
Selector switch for use of clock of scheduler
in summer or winter time
Scheduler modem
control
C.93.12
Selector switch for control modem scheduler
of UNILOG MU, control I/O of module
connector or control scheduler of UNILOG
GPRS
Reset protection
C.93.14
Prevents reset of status register 1 through
menu item 8 (
Status
). If this protection is
activated, status register 1 can only be reset
after opening and closing the housing of
UNIGAS 300. As standard this function is
deactivated
Setting
0.8.5
logger interval for release of P01 in 5, 10, 15,
30 or 60 min
Содержание UNIGAS 300
Страница 1: ...Installation operating and maintenance manual UNIGAS 300...
Страница 2: ......
Страница 55: ......
