Inverta Puls IP6-2 ACT
Operation manual
Page 4 of 20
1 PREFACE
Dear customer!
Congratulation to purchasing of this quality inverter welding machine. Please read whole
Operation manual before you start.
1.1 Product introduction
Inevrta Puls IP6 -2 welding machine is compact pulse MIG-MAG welding inverter especially
developed for car body repair. The unique benefit is double wire feed unit which together
with its excellent brazing characteristic as well as good aluminum welding possibilities
enables to use this device to repair all kinds of vehicles with fine quality results.
Be aware of danger resulted from welding and follow the safety and fire instructions (see the
Part 7).
It is necessary to keep the device on a dry place, to protect device against moisture. It is not
advisable to use the device on the open air during rain.
1.2 Assembly requirements
It is necessary to set the device for welding in protection atmosphere on a dry place with the
sufficient area for cooling. The device is designed for use in covered area (under roof).
1.3 Selecting the accessories
Before using the machine, please make sure it was not damaged during transport!
All accessory equipment parts are present in the package or in wire feeding area.
List of accessories:
-
front wheels set…………..1pc
-
rear wheel…………………2pcs
-
rear shaft…………………..1pc
-
gas hose………………...…1pc
-
belt for gas bottle fixing…..2pcs
-
screw M10x35…………….4pcs
-
spring washer M10….……4pcs
-
plain washer M10………..4pcs
-
plain washer M24…………2pcs
-
splint 3.5x40……………….2pcs
