All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
37
8.0 Maintenance
8.7. Setting cleaner
Adjust cleaner at front
and rear roller.
Cleaner should be set
with a clearance of
1 mm to the roller.
8.8. Care and maintenance of the
hydraulic system
-
The hydraulic system is
under high pressure!
-
When looking for leaks use
proper devices to avoid
risk of injury!
-
To work on the hydraulic
system it is imperative to
switch off the motor and
secure the tractor against
rolling away!
-
When connecting hydraulic
cylinders and motors,
attention must be paid to
the prescribed hydraulic
tubes’ connection!
-
When exchanging the
connections the functions
will be inversed (f.
raising/lowering)
–RISK OF ACCIDENT!-
-
Periodically review the
hydraulic tubes conditions
for damages or aging and
change them if necessary!
-
High-pressure fluids,
(fuel, hydraulic oil)
emerging under high
pressure can penetrate the
skin causing severe
injuries. Therefore
immediately contact a
physician, otherwise severe
infections can be caused.
-
Oils, fuels and filter must
be duly cleared!
-
Be careful rakking hot oil
off
–RISK OF BURNING!-
