All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
54
8.0. Maintenance
8.5.1. Kehrleisten drehen bzw. auswechseln bei Zapfwellenantrieb
CAUTION :
Before carrying out any work, the
engine of the machine and the
tractor engine must be switched
off.
- RISK OF INJURY !
1.
Remove the right drive
protection.
2.
Undo V-belt tensioner
(A)
.
3.
Disassemble V-belt set
(B)
.
4.
Disassemble V-belt pulley
(C)
.
5.
Remove baffle wall
(D)
on both
sides.
6.
Undo the fixing screws
(E)
on
both lower lateral bearings
(F)
.
7.
Pull both lateral bearings
(F)
outwards.
8.
Place the cylinder broom down
onto the floor.
9.
Lift the machine using the
tractor rear hydraulics.
10.
Pull out the cylinder broom.
11.
In the case of slightly
deformed brush rails, these
can be reinstalled turned
through 180°.
12.
In the case of severely
deformed brush rails, all
brush rails have to be
replaced.
13.
Position the cylinder broom
under the machine.
14.
Lower the machine onto the
jockey wheels.
15.
Raise the cylinder broom in
the side notches
(
)
.
16.
All further steps to be
performed in reverse order, as
described.
17.
Ensure that the V-belt pulley
is correctly installed.
18.
Perform adjustments according
to Chapters 8.5. /8.7. and
8.8.
