All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
55
8.0. Maintenance
8.5.2. Kehrleisten drehen bzw. auswechseln bei Motorantrieb
CAUTION :
Before carrying out any work,
the engine of the machine and
the tractor engine must be
switched off.
- RISK OF INJURY !
1.
Remove the right drive
protection.
2.
Undo V-belt tensioner
(A)
.
3.
Disassemble V-belt set
(B)
.
4.
Disassemble V-belt pulley
(C)
.
5.
Remove baffle wall
(D)
on both
sides.
6.
Undo the fixing screws
(E)
on
both lower lateral bearings
(F)
.
7.
Pull both lateral bearings
(F)
outwards.
8.
Place the cylinder broom down
onto the floor.
9.
Raise the machine with a crane.
10.
Pull out the cylinder broom.
11.
In the case of slightly
deformed brush rails, these can
be reinstalled turned through
180°.
12.
In the case of severely
deformed brush rails, all brush
rails have to be replaced.
13.
Position the cylinder broom
under the machine.
14.
Lower the machine onto the
jockey wheels.
15.
Raise the cylinder broom in
the side notches
(
)
.
16.
All further steps to be
performed in reverse order, as
described.
17.
Ensure that the V-belt pulley
is correctly installed.
18.
Perform adjustments according
to Chapters 8.5. /8.7. and 8.8.
