All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
43
6.0. Before Initial Operation
6.10. Adjusting the riddle device
Release clamping lever
(A)
and push in to adjust,
push the adjuster into the desired position;
tighten clamping lever
(A)
Position “0“
on regularly maintained grounds with
coarse dirt
for dry conditions
Position “+1 or +2”
new or highly filled grounds with low dirt
proportion
on regularly maintained grounds with low
proportion of coarse dirt
for deep surface cleaning with light dew
coverage
Position “-1 or -2”
grounds which are not regularly
maintained with broken fibre content
for dry conditions
for flat processing with leaf coverage
6.11. Adjusting the front baffle lugs
Adjust the baffle plate on an
even, secured surface.
The distance (dimension
X
)
from the lower edge of the
baffle lugs to the ground
should be at least
30 mm
.
