SRL-6043S Par Lamp
Mode choose
A. Auto mode
When dipswitches #9 
 are both set at OFF, the fixture works in Auto mode. The
detailed setting you can check in following table:
Combination of Dipswitch #1, #2 and #3 to select different PROGRAM:
Dip #1
Dip #2
Dip #3
PROGRAM selected
OFF OFF OFF PROGRAM 1
（
red twinkle
）
ON OFF
OFF
PROGRAM 2
（
Green twinkle
）
OFF ON OFF PROGRAM 3
（
Blue twinkle
）
ON
ON
OFF
PROGRAM 4
（
Red and Green twinkle
）
OFF OFF ON PROGRAM 5
（
Red &Blue twinkle
）
ON OFF
ON PROGRAM 6
（
Green &Blue twinkle
）
OFF ON ON PROGRAM 7
（
Red, Green &Blue twinkle
）
ON ON ON PROGRAM 8
（
7-color twinkle
）
Dipswitch #4, #5 and #6 specify the speed of the running PROGRAM with 8 levels of
different speed adjustable.
Dipswitch #7 is for FADE selection. OFF turns FADE off while ON turns FADE on.
B. Sound
Active mode
When dipswitch #9 is ON and dipswitch #10 is OFF the fixture works in Sound active
mode.
Various combining of dipswitch #1, #2 and #3 forms different PROGRAM
DIP #1
DIP #2
DIP #3
PROGRAM selected
OFF OFF OFF PROGRAM 1
（
red twinkling
）
ON OFF
OFF
PROGRAM 2
（
Green twinkling
）
OFF ON OFF PROGRAM 3
（
Blue twinkling
）
ON
ON
OFF
PROGRAM 4
（
Red and Green twinkling
）
OFF OFF ON PROGRAM 5
（
Red &Blue twinkling
）
ON OFF
ON PROGRAM 6
（
Green &Blue twinkling
）
OFF ON ON PROGRAM 7
（
Red, Green &Blue twinkling
）
ON ON ON PROGRAM 8
（
7-color twinkling
）
In this mode step is triggered by the rhythm of sound.
C. DMX mode
When dipswitch #10 is set at ON, the fixture works in DMX mode. By various
combining the Dipswitches #1 to #9 you can set the address ranging from 1 to 512.
At this moment, the fixtures can be controlled by DMX controller or another fixture
that has been designated as Auto or Sound Active mode with 5 channels receiving
the data controlling the Red, Green, Blue, brightness and strobe rate output of the
fixture respectively.
Note: the address encoded by combining dipswitches #1 to #9 function as initial
channel address.
8
