SRL-6043S Par Lamp
DMX channel and function chart
Channel Value
Function
CH1
0~255
Adjust CH1 value 0~255 and brightness of red LED is 0~100%
CH2 0~255
Adjust CH2 value 0~255 and brightness of green LED is
0~100%
CH3
0~255
Adjust CH3 value 0~255 and brightness of blue LED is 0~100%
CH4
0~255
Adjust CH4 value 0~255 and brightness of all LEDS is 0~100%
0~10 No
strobe
CH5
11~255
Adjust CH5 value 11~255 and all LEDS strobe.
Strobe speed is from slowest to fastest.
D.
MASTER/SLAVE MODE
Set switch 10 of slaves ON and switch 10 of master OFF, it is in MASTER/SLAVE mode
and they can run at the same time. Master mode has three working ways: auto with fade,
auto without fade and sound. You can choose program via switch 1~3 and choose auto
speed via switch 4~6 in auto mode .
PART III MAINTENACE AND CLEANING
Please refer to the following points during the normal inspection:
A. Be sure all screws and fasteners are securely tightened at all times. Lose screws
may cause unexpected damage or injury.
B. Electric power supply cables must not show any damage or frayed spot.
CAUTION:
Make sure that the power cord of the unit is disconnected from the
mains before performing the following operation to avoid shock
hazard!
We recommend, if possible, frequent cleaning of the device, which will ensure its long
lifespan and bright light output. While performing the cleaning,
please always make sure
that the power cord is disconnected from the mains
and use a moist, lint-free cloth.
Avoid using any alcohol or solvents, as they are harmful to the fixture.
9
