SRL-6043S Par Lamp
PART II Installation and Operation
2.1 Mounting
The fixture can be mounted overhead by a clamp or against a flat surface by the bracket it
has.
When you mount overhead, you can connect its bracket with the clamp through the center
hole.
Verify the structure can hold 10 times the weight of all installed fixtures.
Always use a safety cable or chain as a assistant attachment. The safety cable or chain
must hold 10 times the weight of all installed fixtures.
2.2 AC power
The fixture’s mains lead may require a grounding-type cord cap that fits your power
distribution cable or outlet. Consult a qualified electrician if you have any doubts about
proper installation.
WARNNING: For protection from dangerous electric shock, the fixture must be
grounded (earthed). The AC mains power supply shall have overload
and ground-fault protection.
CAUTION: Verify that the feed cables are undamaged and rated for the current
requirements of all connected devices before use
.
Following the cord cap manufacturer's instructions, connect the yellow and green wire to
ground (earth), the brown wire to live, and the blue wire to neutral. The table below details
some pin identification schemes.
Wire Pin
Marking
Screw
color
Brown
Live
“L”
Yellow or brass
Blue Neutral "N” Silver
Yellow or green
Ground
〨
Green
5
