Kunststoffschweißtechnik
Description of product
Chapter 1
23.07.14 Working
instructions WIDOS WELD IT 315 Steel
Page 7 of 45
1.3. Safety
measures
In case of wrong use, wrong operation or wrong maintenance the machine itself or products
being in the surrounding can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thouroughly read and the corresponding
safety advices must be necessary adhered to.
1.4. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
1.5. Designation of product
The product is designated by two signs at the frame.
The type-labels are fixed on the control unit and on the basic machine.
They contain the type of the machine, the serial number, and the year of construction.
1.5.1 Technical
Data
1.5.1.1 WIDOS WELD IT 315 Steel General data
Material:
PP, PE 80, PVDF, PE 100
Pipe diameter range:
OD 90 – 315 mm
Transport box (l x w x h):
weight:
approx. 1230 x 820 x 560 mm
approx. 50 kg
Total weight in set (without packing,
without, reduction inserts):
approx. 127 kg
Protection: 16
A
Wire cross section:
1,5 mm²
Environment:
- keep the workshop clean (especially the welding
area must be clean)
- If secured by an appropriate measurement that
allowed conditions for welding are indicated, it is
possible to work in any outside temperature
condition as far as the welder is not constrained in
its manual skill
- avoid humidity, if necessary put up a tent
- avoid strong sun beams
- if it is windy shut the pipe endings.
Emissions
- Noises exceeding 80 dB (A) may occur; during
planing it is obligatory to wear ear protection!
- when using the named pipe materials and when
welding below 260 °C / 500 °F no toxicant damp
arises.
