Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 7152 9939 - 0
W. Dommer Söhne GmbH
D-71254 Ditzingen-Heimerdingen
Fax
+49 7152 9939 - 40
info @ widos.de
www.widos.de
23.07.14 Working
instructions WIDOS WELD IT 315 Steel
Page 32 of 45
8. Transport
The machine can be transported in a transport box.
In one box is the WI-PRECISION ® basic machine, the WI-FORCE ® hydraulic unit and the
protection box with planer and WI-Heat ® heating element, in the other the reduction
inserts.
In the box there are partitions in which the component elements of the machine fit in such a
way that they cannot be moved.
Put the elements into the box in such a way that they are fitting in the holders.
The hydraulic hoses at the WI-PRECISION ® basic machine should
not
be unscrewed (air
penetration).
Make sure that they are not being squeezed.
Handle the machine with care.
Do not tilt the WI-FORCE ® hydraulic aggregate because oil may come out.
Protect from heavy shocks and impacts.
Make sure that the box cover is well closed.
Care was taken to build the transport boxes according to lightweight construction.
Be always careful while using automatic handling and carrying machines.
During the transport of the machine there may be cold weldings between the
piston rod and the eyes of the planer shell. These spots on the piston rod may
damage the sealing.
Therefor the eyes must be lubricated with PTFE-
spray before transport!
