Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
23.07.14 Working
instructions WIDOS WELD IT 315 Steel
Page 21 of 45
5.1.1
Insertion of reduction inserts
Insert the reduction inserts on
the bolts into the clamping
rings and then slide the
reduction inserts in the arrow
direction until it stops.
Thereby, the clamping inserts
are fixed.
For removing the reduction
inserts slide the inserts in
opposite direction of arrow,
then you can lift out the
inserts.
5.1.2
Using small and large reduction inserts
If you want to weld a T-piece, you can remove the outer fixed clamping ring.
For this remove the three screws.
Reduction insert
Arrow
Size OD
