widos WELD IT 315 Steel, Перевод инструкций по эксплуатации

Страница: 14 / 54

Kunststoffschweißtechnik
Safety rules
Chapter 2
23.07.14 Working instructions WIDOS WELD IT 315 Steel Page 14 of 45
2.11.5 Danger of squeezing by clamping tool and guideways
There is a possibility of serious injury:
On the one hand between the inner clamping tools and on the other hand
between the outside clamping tool and the end of the guideway.

Do not put hands or foot between clamped pipe ends.

Do not step or grab between the inner clamping tools with not yet clamped pipes.

Do not block opening and closing of the machine.
2.12. Structural modifications on the machine

No modifications, extensions or reconstructions may be performed on the machine without
permission of the manufacturer.

Machine parts that are not in perfect condition are to be replaced immediately.

Only use original
WIDOS
spare and wear parts.

In case of purchase orders please always note the machine and version number.
2.13. Cleaning the machine

The used materials and cloths are to be handled properly and to be disposed of, especially

during cleaning with solvents

when lubricating with oil and grease
2.14. Guarantee and liability
Fundamentally our "general sales and delivery conditions" are in force.
They are at the buyer's disposal latest before making the contract.
Guarantee and liability demands referring to damages of persons or things are excluded if they
are caused by one or several of the following reasons:

Not using the machine according to the prescription.

Unprofessional transport, building-up, starting , operating and maintenance of the

machine.

Running the machine with defective or not properly mounted safety equipment.

Ignoring the information given in this manual.

Structural changes on the machine without permission.

Unsatisfactory checkings of parts of the machine, which are worn out.

Unprofessionally performed repairs.

In case of catastrophes and acts of God.