widos HRG 6 Segment, Перевод инструкций по эксплуатации

Страница: 27 / 36

Maintenance / Repair / Transport Chapter 7
06/06/19 Working Instructions WIDOS HRG 6, Segment Page 29 of 47
7.5 Planer

Check the stress of the drive chain in the planer and grease the chain regularly.

Never lay the planer on its knives.

Check the knives of the planer for sharpness, turn them if necessary (grinded on both sides, max.
thickness of the cuttings: 0.2 mm!).
Check the tension of the chain in the planer and
grease the chain regulary (for example with teflon-
spray), therefore remove the cover of planer.
Loose the screw for tension the chain and swivel the
screw with gear pinion. The screw for tensing the
chain must be hand-tensioned. Afterwards mount
the cover of planer.
7.6 Transport

Handle the machine carefully.

Protect the machine from heavy shocks.

The planer and the heating element can be transported in the basic machine or in the reception
box.

The hydraulic hoses at the basic machine may not be unscrewed (air penetration). Take care that
they are not squeezed.
7.7 Disposal
At the end of their life time, the machine and the wear parts have to be disposed of
properly and non-polluting, and in accordance with the national laws of waste disposal.