widos HRG 6 Segment, Перевод инструкций по эксплуатации

Страница: 19 / 36

Operating and indicating elements Chapter 4
06/06/19 Working Instructions WIDOS HRG 6, Segment Page 19 of 47
4.4 Angle setting at the clamping device
In order to weld angles you may swivel each clamping ring up to 11,25°.

For this purpose detach the hexagon socket screws at the adaptor plate in the front and rear, adjust
the clamping ring to the requested angle (up to 11.25°) by scale and marking (only attached to one
side).

Fix the angle by tightening the hexagon socket screws.
Make sure that both clamping rings do not have contact at the top!
22
Marking
Scale
Hexagon-head screw