widos HRG 6 Segment, Перевод инструкций по эксплуатации

Страница: 16 / 36

Operating and indicating elements Chapter 4
06/06/19 Working Instructions WIDOS HRG 6, Segment Page 16 of 47
4.2 Heating element
Heating element in basic machine: Heating element in reception box:

Adjust the puller rings in a way that they rest against the clamping rings (arrows) while in heating
position; then the heated pipes are separated from the heating element during change-over.
No. Denomination Function
10 Suspension - For lifting-off the heating element
11 Supporting bolt - Insert the heating element with supporting bolts on the clamping
beams / on the reception box
12 Grip - Holding and guidance the heating element
13 Controller - Setting the heating element temperature
14 Connecting cable wtih
plug CEE-16A - Connect with socket 400 V / 16 A on hydraulic aggregat
15 Tear-off ring - seperate heating element and heated pipes
As soon as the heating element is connected to the mains (400 V / 16A), it starts
heating up to the desired temperature.

You may insert the heating element deeper into the basic machine, e.g. in case you intend to weld
an angle. Detach the suspension pins and shift it into one of the lower drill holes.
14
13
10
11
12
15