Wido WD030520013, Инструкция по эксплуатации

Страница: 9 / 20

13MM DRILL PRESS ENG
work area.
25) Thoroughly clean the machine before changing types of workpieces. Combining wood and metal
dust can result in an explosion or fire. Consult expert advice before drilling in work pieces made of
magnesium. The friction generated by the drill bit could the magnesium to ignite resulting in a very
intense fire that could cause severe burns to the operator and/or seriously damage the machine.
26) Turn the ON/OFF switch on the machine to the off position and unplug the power cord from the
electrical receptacle when the drilling operations are finished. Thoroughly clean the area surrounding
the machine making it ready for the next use.
27)
Store the machine in a safe manner when not being used. The storage location must be dry and
lockable. This prevents the machine from storage damage, and from being operated by untrained
persons.
28) If an extension cord is required, use only three-wire extension cords that have three-prong
grounding-type plugs and three-pole receptacles that accept the power tool’s plug. Use only an
approved extension cord suitable for the power input of this tool (see technical data). An undersized
cord will cause a drop in line voltage resulting in loss of power and overheating. When using a cord reel,
always unwind the cord completely. Fully unwind extension cords to avoid potential overheating.
GROUNDING INSTRUCTIONS
This power tool should be grounded while in use to protect the operator from electric shock. The power
tool is equipped with a three-core cable and grounding type plug to fit the proper grounding type
receptacle. The green and yellow (or green) conductor in the cord is the grounding wire. Never connect
the green and yellow (or green) wire to a live terminal.
IMPORTANT NOTE
Be sure the supply is the same as the voltage and frequency given on the rating plate.
Remove the main plug from socket before carrying out any adjustment or servicing.
9