Assembly
Stage
A
.
1). Lay the
R
ear Stabiliser (20) flat on the fl
oor an
d lay the Base Frame U Bracket (22) onto the centre of the
R
ear Stabilise
r
,
making sure the loop is facing the rear of the gym. Place the 2 Weight Guide
T
ubes (21) into the 2 outer holes in the U Bracket.
2). Connect the Main Base (1) and the
R
ear Stabiliser together using 2 x M10 x 60mm Hex Bolts (28), 4 x M10 Flat
W
ashers
(38) and 2 x M10 Nylon L
ocknuts (35).
3). Lay the
F
ootplate (18) onto the front of
t
he Main Base and lock in posi�on with the
F
ootplate
L
ock Pin (43).
4). Slide the 2
R
ubber Bumpers (62) onto the Weigh
t Guide T
ubes followed by the 6 Weight Plates (60).
5).
T
ake the Selector Sha� (16) and fit the Selector
S
h
a
� Bush (58) and Selector Sha� Pin (46) as per inset "A". Slide the
T
op
Plate (59) onto the Weight Guid
e T
ubes and locate the Selector Sha� in posi�on, se�ng the
T
op Plate onto the top Weight
Plate. Use the Weight Selector Pin (41) to select the desire weight.
Tip:
T
o lock the weight stack simply place the Weight Selector Pin (41) into the welded bracket on the top of the Base
Frame U Bracket (22) which will lock the Selector Sha� (16).
Please note that as part of our produc�on checking and for your convenience, all tube caps where necessary have been
fi�ed in the pre-packing stage.
Carefully
unpack
each
component,
checking
against
the
pa
rts list
that
you
have
all
the
necessary
pa
rts to
complete
the
assembly
of
your
product.
PLEASE NOTE
that
some
of
the
pa
rts may
be
pre-fi�ed
to major
components,
so
please
check
carefully
before
contac�ng
our
CUSTOMER SUPPORT
team. For more informa�on, check our website.
21
41
60
62
22
28
38
20
35
01
43
18
46
58
59
16
P
age
14
