Assembly
Stage G.
16). Fit the Backrest Support (4) to the bracket
on the Front Upright using 1 x M10 x 60mm Hex Bolt (28), 2 x M10 Flat
Washers (38) and 1 x M10 Nylon Locknut (35).
Note: - This MUST be fi�ed into the FRONT hole in th
e
bracket.
Fit the Backrest
L
ock-Pin (42) into the REAR hole in the
bracket to lock the Backrest Suppo
r
t in place.
17). Fit the Leg Extension Upright (12) to the Front Stabiliser (19) using 2 x M10 x 55mm Hex Bolt (27), 4 x M10 Flat
Washers (38) and 2 x M10 Nylon Locknut (35). Fit the Leg Extension Upright (12) to the front of the Backrest Support
33
38 35
04
28
42
P
age
20
using 1 x M10 x 55mm Hex Bolt (27), 2 x M10 Flat Washers (38) and 1 x M10 Nylon Locknut (35). Locat
e 1 x M8 x 55mm
Carriage Bolt (33) into the top hole in the front of the Backrest Support and lock the Leg Extension Upright i
n
place using
1 x M8 Knob (50), fi�ed from underneath.
