48
Chapter 4 - Using SABRE™ Ranger for Remote Unmanned SCADA Applications
Remote SMS Activation of IP Connection
To use Remote SMS Activation of IP Connection, use the CONNECT command with the following syntax:
SABRE,CONNECT,<APN>,<Username>,<Password>
For
example:
SABRE, CONNECT, “bgan.inmarsat.com”, “SNGT125”, “bedru8huty”
Note:
If there is no username and password, then the syntax will be:
SABRE, CONNECT, “bgan.inmarsat.com”, “”, “”
Remote SMS De-activation of IP Connection
To use Remote SMS De-activation of IP Connection, use the DISCONNECT command with the following syntax:
SABRE,DISCONNECT
Remote SMS To Reboot The Terminal
To reboot the terminal remotely, use the RESET command with the following syntax:
SABRE,RESET,<Password>
Note:
The default password is eyediw1234.
For
example:
SABRE, RESET, “eyediw1234”
Note:
All SMS commands are case sensitive.
The SMS commands will not be stored in the Inbox.
Remote SMS IP Activation and Deactivation
Remote SMS To Reboot The Terminal
