15
Chapter 2 - Setting Up the SABRE
TM
Ranger
Note:
This SABRE™ Ranger terminal is not intended to be connected to any North American (U.S., Canada) TNV circuit or
PSTN (Public Switch Telephone Network).
Follow these steps to connect the SABRE™ Ranger terminal to your analog (corded) phone:
1. Insert one connector end of the Phone cable to the Multi-function cable’s Phone port.
2. Insert the other connector end of the Phone cable to your analog (corded) phone.
3. To make phone calls, dial the other party’s number using the following format:
00 <country code> <phone number>
followed by
#
key.
Connecting to your Phone
Ethernet cable
Phone cable
DC power
input cable
