45
Chapter 3 - Using SABRE
TM
Ranger Web Console
Network
Select
Auto
or
Manual
for Network registration when SABRE™ Ranger terminal is powered up.
Auto
: SABRE™ Ranger terminal will automatically register to the network when it is powered up.
Manual
: You will need to click
Network Registration
on the
Setup
page to register to the network.
Click
Update Settings
after you have made your selection.
ATCmd
Enter the AT Commands in the text editor.
Click
Send
to register the AT Commands.
To remove the commands from the text editor, click
Clear
.
Misc
Click
Reboot
to reboot the SABRE™ Ranger terminal.
To perform a Factory Reset, enter the Security code
0000
and click
Factory Reset
.
The settings of the SABRE™ Ranger terminal will be reset to the default settings.
