manualshive.com logo in svg

White Knight Heateflex Aquarius, Руководство пользователя

Поделиться
Скачать
White Knight Heateflex Aquarius Скачать руководство пользователя страница 2

Copyright © 2020 White Knight Fluid Handling  |  A Graco company
P: 626.599.8566  |  

[email protected]

  |  

https://wkfluidhandling.com

Aquarius DIW Heaters Owner’s Manual

Ver. 1.0.0  |  29 Apr 2020  |  P. 2

Subject to change without notice

Cardboard 
Corner

Bubble & 
Stretch Wrap

Styrofoam 

Block

Box or 
Crate

Foam 

Pad

Strap

Pallet

Shipping Information

Aquarius

®

 deionized water (DIW) heating systems are thoroughly tested and 

then packaged and shipped horizontally as shown below. They are wrapped in 
bubble pack, plastic wrapped, and then placed onto a pallet with a 2-1/2” thick 
impact absorbing foam pad. The unit is strapped down to a pallet, covered with 

corrugated box or crating material, and then taped and re-strapped.

Materials Warranty

Declaration of Conformity to CE

Heateflex

®

 warranties the equipment offered to be free from defects in material and 

workmanship, under normal handling and proper usage, for a period of one year from 

the date of shipment. All products purchased from manufacturers by Heateflex

®

 will carry 

that manufacturer’s warranty period. This expressed warranty is in lieu of, and excludes 

all other representations made by advertisements or by agents. There are no implied 
warranties for the equipment.

Heateflex

®

 agrees to correct any defect in workmanship or material which may develop 

under normal handling and proper usage during a period of one year from the date of 
shipment or, by its option, to repair or replace the defective equipment F.O.B. Arcadia, 

California, USA. Purchaser’s remedies shall be limited exclusively to the right of repair or 

replacement.

Heateflex

®

 shall not be liable for any expenses incurred by the purchaser or any other 

person by reason of the use, misuse, sale, or fabrication of the equipment regardless of 

whether the equipment conforms to the specifications.

Items returned for warranty repair must be prepaid and insured for shipment. Warranty 

claims are processed on the condition that prompt notification of a defect is given within 

the warranty period. Heateflex

®

 shall have the sole right to determine whether, in fact, a 

warranty situation exists.

Declaration of Conformity is optional for Aquarius

®

  systems 

and will be provided as requested and/or as necessary. 

Содержание Heateflex Aquarius





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды