manualshive.com logo in svg

White Knight Heateflex Aquarius, Руководство пользователя

Поделиться
Скачать
White Knight Heateflex Aquarius Скачать руководство пользователя страница 18

Copyright © 2020 White Knight Fluid Handling  |  A Graco company
P: 626.599.8566  |  

[email protected]

  |  

https://wkfluidhandling.com

Aquarius DIW Heaters Owner’s Manual

Ver. 1.0.0  |  29 Apr 2020  |  P. 16

Subject to change without notice

Verify that the specific sanitation method 

is compatible with the O-ring material 
selected. The table (

right

) indicates 

examples of acceptable means of 

sanitation with a given O-ring material 
for Aquarius

®

 systems. Consult factory 

to verify other means.

We recommend that users follow proper 
decontamination and decommissioning 
procedures when removing Aquarius

®

 

systems from service. Please contact us 
for recommendations on proper disposal 

or qualified dismantlers in your area.

Aquarius

®

 systems features an Auto Purge option that reduces the potential of bacteria 

growth in the DIW or process fluid and Aquarius

®

 plumbing system. The purge feature 

of the Aquarius

®

 can be activated or used three different ways:

  1. Automated using the PF3000 control logic.

  2. Manually through the use of the HMI/Touch screen interface.

  3. Remotely through a communications interface.

Heating DIW or process fluid is not permitted while the system is actively purging. 

Please refer to the PF3000 controller manual for more information on the operation of 
the Auto Purge feature and HMI/Touch screen operation of the Aquarius

®

 system. The 

Auto Purge feature is not available on Aquarius

®

 systems with the recirculation feature.

10. Aquarius

®

 with Auto Purge (Optional)

Item

Material of construction

Cabinet

Carbon Steel Powder Coated

Drip Pan

Polypropylene (PP)

Wire Insulation

Polyvinyl Chloride (PVC)

Tetrafluoroethylene (TFE)

Plumbing

Fluorinated Ethylene Propylene (FEP)

Perfluoro-alkoxy Alkanes (PFA)

Polyvinylidene Fluoride (PVDF)

Polytetrafluoroethylene (PTFE)

O-Ring Material Approved Sanitization Methods
Chemraz 505

Carbon Steel Powder Coated

Viton

H2O2 and HCl

Aquarius

®

 systems with the optional recirculation feature have a built-in recirculation 

system and are equipped with an ultra–pure PFA-PTFE bearing-less pump, pump air 
cooling system, and safety interlocks. The pump is controlled by a PLC. The Aquarius

®

 

recirculation feature is optimized for precise DIW temperature control during recirculation, 
and provides hot DIW at temperature on-demand. The recirculation feature reduces heat 
up time by implementing controlled heating at instances when demand is not required. 
When demand is needed, the Aquarius

®

 system returns to single pass mode and is ready 

to provide DIW at the specified temperature.

In addition to saving process time, Aquarius

®

 recirculation feature also reduces DIW usage 

which is an added cost savings for waste water and energy. The ability of the Aquarius

®

 to 

provide an instant supply of heated DIW negates the requirement for a trickle flow, which 

is commonly used by DIW heaters to maintain pre-demand water temperature. Aquarius

®

 

recirculation feature will also discourage bacteria growth from forming in the process fluid 

and Aquarius

®

 plumbing, which is essential in maintaining high purity requirements. 

11. Aquarius

®

 with Recirculation (Optional)

Содержание Heateflex Aquarius





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды