13.
Connect the end of the display cable labeled
“UNIT” to the wire labeled “UNIT” coming from the electrical box.
UNIT
UNIT
INSTALLING THE EVAPORATOR UNIT WITH ATTIC ACCESS
NOTE:
The unit comes in black. The mounting bracket and front grille are paintable, enabling you to match your desired color.
14.
Slide the electrical panel back into the unit.
15.
Reinstall the top access panel and fasten the
eighteen
(
18
) screws into place.
16.
Insulate around the display cable, bottle
probe, line set, and drain line to ensure no air is
being pulled into the
unit through
11.
Slide the electrical panel out from the unit.
12.
Connect the end of the straight black bottle
probe cable to the circular connector on the
exterior of the
electrical box
Page 15
08/04/21
