manualshive.com logo in svg

whisker Litter-Robot 3, Инструкция по эксплуатации

Поделиться
Скачать
whisker Litter-Robot 3 Скачать руководство пользователя страница 33

whiskersupport.com

33

Overload Detection

If the Globe becomes jammed or overloaded when rotating counter-clockwise, the 
Motor will stop and the Globe will return to the Home position. The Control Panel will 
flash blue then red lights. 

If the Globe becomes jammed or overloaded when rotating clockwise, the Motor will 
stop and reverse for 5 seconds. The unit will start to cycle again after 15 seconds, 
to attempt to return to the Home position. If the Globe is unable to reach the Home 
position after three attempts, the Globe will stop and the Control Panel will flash yellow 
then red lights.

 
If the Globe is able to reach the Home position after a jam or overload condition, the 
Control Panel will still flash the corresponding error code. The unit will continue to 
function in Automatic Mode.

 
If the Control Panel is indicating a jammed or overloaded error, turn the unit off and 
remove the Bonnet and the Globe. Check for gear/motor obstruction. Reassemble 
the unit and verify proper litter level. Power the unit on and let it cycle. If the problem 
persists, contact Customer Service.

Содержание Litter-Robot 3









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды