background image

whiskersupport.com

25

Step Mat

The Step Mat provides a soft, gripping surface for 

your cat’s entry/exit, and acts as a litter catch to 
reduce litter tracking. The flexible, removable Step 
Mat can be cleared of litter by simply peeling up, 
turning upside down inside the Globe, and flexing.

8-Hour Sleep Mode

This mode allows you to deactivate the Cat Sensor for 8 hours so the unit will not cycle 
automatically. Sleep Mode is useful for units located in bedrooms or areas where you 
may not want the unit to cycle for a period of 8 hours.

The 8-hour period is repeated every 24 hours; the start is determined by the time the 
mode is initially set. 

To enter Sleep Mode, at the desired time, press and hold the Cycle button until the  
yellow light turns on (in addition to the blue standby light). Both the yellow and blue 
lights will be on during the next 8 hours, indicating the unit is in 8-Hour Sleep Mode.

When the 8-hour period expires, the unit will run a Clean cycle. Once the Globe has 
returned to the Home position, only the blue light will be on. When the 8-hour sleep 
period begins again automatically, both the yellow and blue lights will be on again.  

To exit Sleep Mode, press and hold the Cycle button until the yellow light turns off. 
Or, if only the blue light is on because you are not within the 8-hour sleep period, the 
yellow light will flash to indicate you have exited this mode.

Step Mat

Содержание Litter-Robot 3









































Отзывы: