manualshive.com logo in svg

whisker Litter-Robot 3, Инструкция по эксплуатации

Поделиться
Скачать
whisker Litter-Robot 3 Скачать руководство пользователя страница 11

whiskersupport.com

11

The Litter-Robot litter sifting system requires 

clumping

 litter to work properly. We 

recommend a high-quality, clay-clumping litter. Use of lightweight litters, such as corn 
or wheat, may require more weight to activate the Cat Sensor. Litter beads and crystals 
that are small enough to pass through the screen will also work (periodic changing of 
this type of litter is required).

DO NOT 

use litters that are the strictly absorbent, non-clumping, loose-clumping, news-

paper-based, or wood-based pellets.

If you are using a litter alternative not listed here, please contact Customer Service to 
make sure you are using a compatible litter.

Tip:

  When filling the Litter-Robot for the first time, it is best to continue using the brand 

of litter you were using previously—as long as it is a clumping type of litter. Your cat will 
need to adjust to the new litter box, and introducing a new litter at the same time may 
increase his anxiety. However, if you are currently using a non-clumping litter, you will 
need to switch to a clumping type. 

Power and Initial Clean Cycle

Plug the small end of the Power Supply into the 
power input at the back of the Base. Then plug  
the AC/DC adapter into a wall outlet.

Locate and press the Power button. The Litter-Robot 
will perform an initial Clean cycle that will last about 2 
minutes. Learn more about the Clean cycle on page 14.

Power Input

Congratulations!

Your Litter-Robot is now ready to use; however, we recommend powering the unit off 
until your cat/s become familiar with and begin using the Litter-Robot. 

Содержание Litter-Robot 3









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды