manualshive.com logo in svg

whisker Litter-Robot 3, Инструкция по эксплуатации

Поделиться
Скачать
whisker Litter-Robot 3 Скачать руководство пользователя страница 19

whiskersupport.com

19

Reset [Control Panel Lockout]

Press and Release:  

When pressed while the Globe is at the Home position with the blue light on, it resets 
the Cat Sensor.

When pressed during a cycle, it pauses the cycle. If pressed again while paused, it will 
abort the cycle.

If pressed when the red light is on, it cancels the Wait Time and the unit returns to 
standby (blue light on).

IMPORTANT:

 Any time you do anything that affects the weight or placement of the unit, 

including adding or removing litter, emptying the Waste Drawer, or moving or cleaning 
the unit, press the Reset button once you are done. The Reset button adjusts the Cat 
Sensor automatically, ensuring the Litter-Robot will detect your cat and cycle properly.

Press and Hold:  Activates Control Panel Lockout (see page 26), indicated by the blue 
light blinking momentarily. 

While in Control Panel Lockout mode, press and hold the Reset button to exit the mode, 
indicated by the blue light blinking momentarily. 

This setting will disable all button functions on the Control Panel while allowing the unit 
to function normally in Automatic Mode. During Control Panel Lockout you can still turn 
the unit off by pressing and holding the Power button for 3 seconds.

Reset Button

Содержание Litter-Robot 3









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды