17
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on the back page of this manual.
Available accessories:
■
A Stack Kit is available to stack your washer and dryer.
■
An optional matching pedestal is available to raise your
washer to a more comfortable working height.
To order, call the dealer from whom you purchased your washer
or refer to the “Assistance or Service” section.
Optional tools:
Parts supplied:
NOTE:
All parts supplied for installation are in the washer
drum. Inlet hoses and washers are not included.
4" min
(102 mm)
Wood block
Adjustable or open-end
wrenches 3/8" and 1/2"
Ruler or measuring tape
Level
Pliers that open to 1
9
⁄
16
"
Flashlight
Bucket
Cable tie
U-shaped hose form
Tools needed:
Installation Requirements
Tools and Parts
Gather required tools and parts before starting installation.
Transport bolt hole
plugs (4)
INSTALLATION INSTRUCTIONS
3/8" socket wrench
If you have:
You will need:
Laundry tub or standpipe
taller than 55" (1.4 m)
Sump pump system
(if not already available)
Overhead sewer
Standard 20 gal. (76 L)
30" (762 mm) tall drain tub or utility
sink, sump pump and connectors
(available from local plumbing
suppliers)
Floor drain system
Siphon Break Kit
Part Number 285834
Connector Kit (x2)
Part Number 285835
Additional Drain Hose
Part Number 8318155
Drain hose too short
Extension Drain Hose
Part Number 285863
Connector Kit Part Number 285835
Water faucet beyond
reach of fill hose
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314
10 ft (3.0 m) Part Number 350008