6. STARTING A WASHING PROGRAM
Program Table
Program
Program Details
(50°C)
147
This program is suitable for dishes difficult
to wash. However, it is not applicable to
dishes which cannot be washed with
high temperature water.
6-10
(55°C)
139
This program is more reasonable in terms
of energy consumption compared with
other programs.
We suggest using this program for dishes
without heavy oil and hard to wash.
9
ECO
Intensive
Running
Time(min)
Detergent*
Powder(g)
(50°C)
76
Cycle for delicate items and lightly soiled
loads, such as glasses.
6-10
Glass
(55°C)
90
Normally soiled crockery. Everyday cycle
that ensures optimal cleaning
performance in a shorter time.
6-10
Daily
(50°C)
162
Suitable for night-time operation of the
appliance. No buzzer will ring after the washing
cycle. Optimum performance ensured.
6-10
Silent
(50°C)
28
This program consumes less time and
energy. It is suitable for small quantity
dishes which are easy to wash.
6-10
Rapid
14
To rinse dishes that you plan to wash later
that day.
/
Pre-wash
(50°C)
60
Light to normally soiled crockery. Everyday
program suitable for non-dried and fresh
soiling, assuring clean and dried dishes in
just 60 mins.
6-10
1 h Wash & Dry
(72°C)
38
Program to be used to perform maintenance
of the dishwasher. It cleans the interior of
the appliance using hot water.
Self-Clean
6-10
1. Press “Start/Pause“ button
2. Open the dishwasher door
3. Pull out the rack and put in left-out tableware
4. Push back the rack into the dishwasher
5. Close the dishwasher door
6. Press Start again to re-start the dishwasher
WARNING!
1. After pressing Pause, don't open the door before the machine stops operate to prevent scald danger!
2. Watch out for the steam and hot water when opening the door!
3. Carefully check if the door is closed!
4. Before re-starting the dishwasher, please check the settlement of the tableware and confirm if there is
any tableware extending out from the bottom of the rack!
NOTE:
A click could be heard when the door is closed perfectly.
Make sure that the water supply is turned on to full pressure. Close the door, press the "Power" button,
press the program button to select a desired Wash cycle. (See the section entitled "Program Table") . With
a little force to ensure the door is properly closed.
Turning on the Appliance
Starting a wash cycle...
1. Draw out the rack, load the dishes and push it back. And then pour in the detergent.
2. Insert the plug into the socket.
The filtering system is equipped for preventing large food residue or other objects from entering the
washing pump. Food residue sometimes may block the filtering system.
7
．
MAINTENANCE & CLEANING
1. Rotate to the left to take out the filter.
2. The filter is made of three parts; please
disassemble to wash.
3. After cleaning, assemble the filter and
then install
it
back to the dishwasher.
Filter Assembly
To obtain optimal cleaning performance and effect, the filter assembly must be cleaned. The filtering net
can remove food particles in water during the washing cycle. The entire filter assembly should
Add Dishes During Program Operation
Cleaning the Filter
12
13
Mainwash
Temp. (°C)
/
1.
2.
4.
5.
6.
3.
7.
8.
9.
*If 3-in-1 dishwasher tablet (rinse aid, salt and detergent in 1 dose) is used, please put the whole tablet in the
detergent box directly.
EN
1
2
3
