29
SHELVES, BINS, AND DRAWERS
Shelves and Shelf Frames
The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open and save energy.
Shelf Height Adjustment
Shelf height can be adjusted by changing the adjustable shelf
mounts between their vertical and horizontal positions.
1.
Carefully lift the shelf off the shelf mounts and turn the flipper
to the desired orientation.
2.
Repeat for remaining shelf mounts.
3.
Apply pressure to the top of the shelf to ensure the shelf is
properly seated on the shelf mounts.
NOTES:
n
You will need to remove middle shelf first before removing
top shelf.
4.
Remove the bottom shelf by lifting it up and out of the
shelf supports. Then pull the shelf forward and tilt up to a
vertical position. Turn the shelf at an angle and pull out of
the refrigerator.
5.
Replace the bottom shelf by putting the shelf in the
refrigerator at an angle with the shelf up. Lift the front of the
shelf down and in until rear shelf drops into the shelf supports.
Lower the front of the shelf and make sure that
the shelf is in position.
Pull out platter Removal
To remove and replace pull-out platter:
NOTE:
Refrigerator doors will need to be removed to remove Pull
out platter. See the “Remove and Replace Refrigerator Doors”
section for more information.
1.
Pull the pull-out platter to the fully open position or when
it stops.
2.
Locate the pull-out platter retention clips on both sides.
These are in the side under the pull-out platter.
3.
Push the clip up from the bottom with your finger.
4.
After both clips have been disengaged, carefully remove
the pull-out platter toward the front of the refrigerator.
Crisper Drawers
To remove and replace the drawers:
1.
Grasp the handle at the bottom of the drawer and slide the
drawer straight out to the stop. Lift the drawer off the bottom
guide.
2.
Replace the drawer by placing it on the bottom drawer guide
and pushing it past the drawer stop into position.
Refrigerator Door Bins
The bins on your refrigerator door are adjustable to meet your
individual storage needs. The bins make it easy to customize door
storage to hold gallon containers.
Door Bin Divider (on some models)
This divider fits in the door bin to divide the bin and elevate
smaller items at the back of the bin.
