13
Electrical Requirements (Great Britain and Ireland only)
IMPORTANT:
This refrigerator must be earthed.
Fuse Replacement
If the main lead of this refrigerator is fitted with a BS1363A,
13 A fused plug, to replace a fuse in this type plug use an A.S.T.A.
approved fuse to BS 1362 type and proceed as follows:
1.
Remove the fuse cover (A) and fuse (B).
2.
Fit replacement 13 A fuse into the fuse cover.
3.
Reinsert both the fuse and its cover into the plug.
IMPORTANT:
The fuse cover must be refitted when changing a
fuse. If fuse cover is lost, the plug must not be used until a correct
replacement cover is fitted. A correct replacement is identified by
the colour insert or colour “word” embossed on the base of the
plug. Replacement fuse covers are available at your local
electrical shop.
For the Republic of Ireland (only):
The information given in respect of Great Britain will frequently
apply, but a third type of plug and socket is also used, the 2-pin,
side earth type.
Socket/Plug (valid for both countries):
If the fitted plug is not suitable for your socket, please contact
After-sales Service for further instruction. Please do not
attempt to change the plug yourself. This procedure needs
to be carried out by a qualified technician in compliance with
the manufacturer’s instructions and current standard safety
regulations.
Temperature
This refrigerator is designed for operation in places where the
temperature comes within the following ranges, according to
climatic class shown on the rating plate. The refrigerator may not
work properly if it is left for a long time at a temperature outside
the specified range.
NOTE:
It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
Climatic Class
Amb. T. (°C)
Amb. T. (°F)
SN
From 10 to 32
From 50 to 90
N
From 16 to 32
From 61 to 90
ST
From 16 to 38
From 61 to 100
T
From 16 to 43
From 61 to 110
A
A. Fuse cover
B. Fuse
B
