4
Electric requirements
WARNING
Electrical shock hazard
Failure to follow these instructions can result in death,
fire or electrical shock.
The electrical ratings for your air conditioner are listed on the
model number label. The model and serial label is located on
one side of the evaporator and the condenser.
The specific electrical requirements are indicated in the
following table. Follow the requirements for the type of wiring for
the electric power cord.
Component
Heavy duty
cable
Evaporator
1
4
AWG
Condenser
1
4
AWG
Communications
18 AWG
Recommended method for grounding
For your personal safety, this air conditioner should be
grounded. If an appropriate electrical outlet is not available, it is
the responsibility of the customer to properly install grounding
by a qualified electrical installer.
.
It is the responsibility of the client:
Call a qualified electrical installer.
Connect the device to a two-pole switch device, with a
contact distance of at least 3 mm, located at a point that is
accessible after installation.
Ensure that the electrical installation is adequate and is
made in accordance with the National Electric Code, and
all local codes and regulations.
Unpack your air conditioner
WARNING
Excessive weight hazard
Always use the help or at least one or more people to
move and install the air conditioner.
Failure to follow these instructions could cause dead or
electrical shock.
Remove packaging materials
Remove and properly dispose all packaging materials.
Remove tapes and rubber residue from the Air conditioner
before turning it on. Rub a little dishwasher liquid detergent
on the adhesive with fingers. Clean with warm water and
dry.
Do not use sharp instruments, alcohol for friction,
flammable liquids or abrasive cleaning products to remove
the remains of tape or rubber. These products can damage
the surface of your air conditioner.
Treat the air conditioner with care.
Component
Heavy duty
cable
16 AWG
16 AWG
18 AWG
Models
S
WA
3020
Q
S
WA
4020
Q
Evaporator
Condenser
Communications
Models
S
WA
1040
Q
S
WA
2
0
40
Q
Component
Heavy duty
cable
1
4
AWG
1
4
AWG
18 AWG
Models
S
WA
3
1
20
Q
S
WA
4
1
20
Q
Evaporator
Condenser
Communications
Component
Heavy duty
cable
1
4
AWG
1
4
AWG
18 AWG
Models
S
WA
3
2
20
Q
S
WA
4
2
20
Q
Evaporator
Condenser
Communications
Содержание SWA1040Q
Страница 17: ...17 INSTRUCCIONES DE INSTALACIÓN ...
Страница 23: ... ...