Whirlpool SWA1040Q, Инструкция по эксплуатации и уходу

Страница: 33 / 45

10
OPERATING INSTRUCTIONS
6.- Smart mode "SMART"
Press the SMART button, the unit will enter SMART mode
directly regardless of whether the unit is on or off.
In this mode, temperature and fan speed are automatically set
based on the temperature of the room.
The operating mode and temperature are determined by the
internal temperature.
SMART control for models with heat pump
Internal
temperature
Operating
mode
Temperature target
21°C or less HEATING 22°C
21°C – 23°C FAN ONLY
23°C – 26°C DRY The temperature in the
room decreases 2°C
after 3 minutes of
operation
Above 26°C COOLING 26°C
SMART control for models with cooling only
Internal
temperature
Operating mode Temperature
target
23°C or less FAN ONLY 22°C
23°C – 26°C DRY The
temperature
in the room
decreases
2°C after 3
minutes of
operation
Above 26°C COOLING 26°C
The SMART button does not work in Turbo mode.
Note: The temperature, air flow and direction are automatically
controlled in SMART mode. However, a decrease or increase of
7 °C can be set with the remote control if you do not feel
comfortable.
What can be done in SMART mode
What do you feel Button Setting up procedure
Not comfortable because of the volume of
air flow
FAN The speed of the indoor fan alternates between High, Medium
and Low each time the button is pressed.
Not comfortable due to the direction
of the air flow
SWING Press once, the vertical adjustment grid changes to change the
direction of the vertical air flow. Press again, the grid that
distributes the air stops. For the direction of the horizontal air
flow, please see the chapter "Control of air flow direction".
Smart
Turbo
Display Off